Removed files that are no longer needed now that we use automake.

7 files changed, 0 insertions, 4484 deletions

diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 7178155..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,308 +0,0 @@
-# NOTE: If you have no `make' program at all to process this makefile, run
-# `build.sh' instead.
-#
-# Copyright (C) 1988,89,91,92,93,94,95,96 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-#
-#	Makefile for GNU Make
-#
-
-# Ultrix 2.2 make doesn't expand the value of VPATH.
-VPATH = @srcdir@
-# This must repeat the value, because configure will remove `VPATH = .'.
-srcdir = @srcdir@
-
-CC = @CC@
-
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-
-# Define these for your system as follows:
-#	-DNO_ARCHIVES		To disable `ar' archive support.
-#	-DNO_FLOAT		To avoid using floating-point numbers.
-#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
-#				Some compilers apparently accept this
-#				without complaint but produce losing code,
-#				so beware.
-# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
-# See also `config.h'.
-defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
-
-# Which flavor of remote job execution support to use.
-# The code is found in `remote-$(REMOTE).c'.
-REMOTE = @REMOTE@
-
-# If your system doesn't have alloca, or the one provided is bad, define this.
-ALLOCA = @ALLOCA@
-ALLOCA_SRC = $(srcdir)/alloca.c
-
-# If your system needs extra libraries loaded in, define them here.
-# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
-# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
-# alloca.c instead on those machines.
-LOADLIBES = @LIBS@
-
-# Any extra object files your system needs.
-extras = @LIBOBJS@
-
-# Common prefix for machine-independent installed files.
-prefix = @prefix@
-# Common prefix for machine-dependent installed files.
-exec_prefix = @exec_prefix@
-
-# Directory to install `make' in.
-bindir = $(exec_prefix)/bin
-# Directory to find libraries in for `-lXXX'.
-libdir = $(exec_prefix)/lib
-# Directory to search by default for included makefiles.
-includedir = $(prefix)/include
-# Directory to install the Info files in.
-infodir = $(prefix)/info
-# Directory to install the man page in.
-mandir = $(prefix)/man/man$(manext)
-# Number to put on the man page filename.
-manext = 1
-# Prefix to put on installed `make' binary file name.
-binprefix =
-# Prefix to put on installed `make' man page file name.
-manprefix = $(binprefix)
-
-# Whether or not make needs to be installed setgid.
-# The value should be either `true' or `false'.
-# On many systems, the getloadavg function (used to implement the `-l'
-# switch) will not work unless make is installed setgid kmem.
-install_setgid = @NEED_SETGID@
-# Install make setgid to this group so it can read /dev/kmem.
-group = @KMEM_GROUP@
-
-# Program to install `make'.
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-# Program to install the man page.
-INSTALL_DATA = @INSTALL_DATA@
-# Generic install program.
-INSTALL = @INSTALL@
-
-# Program to format Texinfo source into Info files.
-MAKEINFO = makeinfo
-# Program to format Texinfo source into DVI files.
-TEXI2DVI = texi2dvi
-
-# Programs to make tags files.
-ETAGS = etags -w
-CTAGS = ctags -w
-
-GLOB = glob/libglob.a
-
-objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
-       rule.o implicit.o default.o variable.o expand.o function.o	\
-       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o	\
-       getopt.o getopt1.o						\
-       $(GLOB) $(ALLOCA) $(extras)
-srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c		\
-       $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c		\
-       $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c		\
-       $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c	\
-       $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c	\
-       $(srcdir)/vpath.c $(srcdir)/version.c				\
-       $(srcdir)/remote-$(REMOTE).c					\
-       $(srcdir)/ar.c $(srcdir)/arscan.c				\
-       $(srcdir)/signame.c $(srcdir)/signame.h				\
-       $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h	\
-       $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/filedef.h		\
-       $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h		\
-       $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in
-
-
-.SUFFIXES:
-.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
-
-all: make
-info: make.info
-dvi: make.dvi
-# Some makes apparently use .PHONY as the default goal if it is before `all'.
-.PHONY: all check info dvi
-
-make.info: make.texinfo
-	$(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info
-
-make.dvi: make.texinfo
-	$(TEXI2DVI) $(srcdir)/make.texinfo
-
-make.ps: make.dvi
-	dvi2ps make.dvi > make.ps
-
-make: $(objs)
-	$(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new
-	mv -f make.new make
-
-# -I. is needed to find config.h in the build directory.
-.c.o:
-	$(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \
-	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
-
-# For some losing Unix makes.
-SHELL = /bin/sh
-@SET_MAKE@
-
-$(GLOB): FORCE config.h
-	cd glob; $(MAKE) libglob.a
-FORCE:
-
-tagsrcs = $(srcs) $(srcdir)/remote-*.c
-TAGS: $(tagsrcs)
-	$(ETAGS) $(tagsrcs)
-tags: $(tagsrcs)
-	$(CTAGS) $(tagsrcs)
-
-.PHONY: install installdirs
-install: installdirs \
-	 $(bindir)/$(binprefix)make $(infodir)/make.info \
-	 $(mandir)/$(manprefix)make.$(manext)
-
-installdirs:
-	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
-
-$(bindir)/$(binprefix)make: make
-	$(INSTALL_PROGRAM) make $@.new
-	@if $(install_setgid); then \
-	   if chgrp $(group) $@.new && chmod g+s $@.new; then \
-	     echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
-	   else \
-	     echo "$@ needs to be owned by group $(group) and setgid;"; \
-	     echo "otherwise the \`-l' option will probably not work."; \
-	     echo "You may need special privileges to install $@."; \
-	   fi; \
-	 else true; fi
-# Some systems can't deal with renaming onto a running binary.
-	-rm -f $@.old
-	-mv $@ $@.old
-	mv $@.new $@
-
-$(infodir)/make.info: make.info
-	if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
-	for file in $${dir}/make.info*; do \
-	  name="`basename $$file`"; \
-	  $(INSTALL_DATA) $$file \
-	    `echo $@ | sed "s,make.info\$$,$$name,"`; \
-	done
-# Run install-info only if it exists.
-# Use `if' instead of just prepending `-' to the
-# line so we notice real errors from install-info.
-# We use `$(SHELL) -c' because some shells do not
-# fail gracefully when there is an unknown command.
-	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
-	  if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
-	  install-info --info-dir=$(infodir) $$dir/make.info; \
-	else true; fi
-
-$(mandir)/$(manprefix)make.$(manext): make.man
-	$(INSTALL_DATA) $(srcdir)/make.man $@
-
-
-loadavg: loadavg.c config.h
-	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
-	      loadavg.c $(LOADLIBES) -o $@
-# We copy getloadavg.c into a different file rather than compiling it
-# directly because some compilers clobber getloadavg.o in the process.
-loadavg.c: getloadavg.c
-	ln $(srcdir)/getloadavg.c loadavg.c || \
-	cp $(srcdir)/getloadavg.c loadavg.c
-check-loadavg: loadavg
-	@echo The system uptime program believes the load average to be:
-	-uptime
-	@echo The GNU load average checking code believes:
-	./loadavg
-check: check-loadavg
-
-
-.PHONY: clean realclean distclean mostlyclean
-clean: glob-clean
-	-rm -f make loadavg *.o core make.dvi
-distclean: clean glob-realclean
-	-rm -f Makefile config.h config.status build.sh stamp-config
-	-rm -f config.log config.cache
-	-rm -f TAGS tags
-	-rm -f make.?? make.??s make.log make.toc make.*aux
-	-rm -f loadavg.c
-realclean: distclean
-	-rm -f make.info*
-mostlyclean: clean
-
-.PHONY: glob-clean glob-realclean
-glob-clean glob-realclean:
-	cd glob; $(MAKE) $@
-
-Makefile: config.status $(srcdir)/Makefile.in
-	$(SHELL) config.status
-glob/Makefile: config.status $(srcdir)/glob/Makefile.in
-	$(SHELL) config.status
-config.h: stamp-config ;
-stamp-config: config.status $(srcdir)/config.h.in
-	$(SHELL) config.status
-	touch stamp-config
-
-#configure: configure.in aclocal.m4
-#	cd $(srcdir) && autoconf $(ACFLAGS)
-#config.h.in: configure.in aclocal.m4
-#	cd $(srcdir) && autoheader $(ACFLAGS)
-
-# This tells versions [3.59,3.63) of GNU make not to export all variables.
-.NOEXPORT:
-
-# The automatically generated dependencies below may omit config.h
-# because it is included with ``#include <config.h>'' rather than
-# ``#include "config.h"''.  So we add the explicit dependency to make sure.
-$(objs): config.h
-
-# Automatically generated dependencies will be put at the end of the file.
-
-# Automatically generated dependencies.
-commands.o: commands.c make.h signame.h dep.h filedef.h variable.h \
- job.h commands.h
-job.o: job.c make.h signame.h job.h filedef.h commands.h variable.h
-dir.o: dir.c make.h signame.h
-file.o: file.c make.h signame.h dep.h filedef.h job.h commands.h \
- variable.h
-misc.o: misc.c make.h signame.h dep.h
-main.o: main.c make.h signame.h dep.h filedef.h variable.h job.h \
- commands.h getopt.h
-read.o: read.c make.h signame.h dep.h filedef.h job.h commands.h \
- variable.h glob/glob.h
-remake.o: remake.c make.h signame.h filedef.h job.h commands.h dep.h
-rule.o: rule.c make.h signame.h dep.h filedef.h job.h commands.h \
- variable.h rule.h
-implicit.o: implicit.c make.h signame.h rule.h dep.h filedef.h
-default.o: default.c make.h signame.h rule.h dep.h filedef.h job.h \
- commands.h variable.h
-variable.o: variable.c make.h signame.h dep.h filedef.h job.h \
- commands.h variable.h
-expand.o: expand.c make.h signame.h filedef.h job.h commands.h \
- variable.h
-function.o: function.c make.h signame.h filedef.h variable.h dep.h \
- job.h commands.h
-vpath.o: vpath.c make.h signame.h filedef.h variable.h
-version.o: version.c
-ar.o: ar.c make.h signame.h filedef.h dep.h
-arscan.o: arscan.c make.h signame.h
-signame.o: signame.c signame.h
-remote-stub.o: remote-stub.c make.h signame.h filedef.h job.h \
- commands.h
-getopt.o: getopt.c getopt.h
-getopt1.o: getopt1.c getopt.h
-getloadavg.o: getloadavg.c
diff --git a/README b/README
deleted file mode 100644
index ade2285..0000000
--- a/README
+++ /dev/null
@@ -1,37 +0,0 @@
-This directory contains the 3.75.1 test release of GNU Make.
-All bugs reported for previous test releases have been fixed.
-Some bugs surely remain.
-
-For general building and installation instructions, see the file INSTALL.
-If you need to build GNU Make and have no other `make' program to use,
-you can use the shell script `build.sh' instead.  To do this, first run
-`configure' as described in INSTALL.  Then, instead of typing `make' to
-build the program, type `sh build.sh'.  This should compile the program
-in the current directory.  Then you will have a Make program that you can
-use for `make install', or whatever else.
-
-Some systems' Make programs are broken and cannot process the Makefile for
-GNU Make.  If you get errors from your system's Make when building GNU
-Make, try using `build.sh' instead.
-
-See README.W32 for details about GNU Make on Windows NT or 95.
-See README.Amiga for details about GNU Make on AmigaDOS.
-The MSDOS port of GNU Make is available as part of DJGPP; see the
-WWW page http://www.delorie.com/djgpp/ for more information.
-
-It has been reported that the XLC 1.2 compiler on AIX 3.2 is buggy such
-that if you compile make with `cc -O' on AIX 3.2, it will not work correctly.
-It is said that using `cc' without `-O' does work.
-
-One area that is often a problem in configuration and porting is the code
-to check the system's current load average.  To make it easier to test and
-debug this code, you can do `make check-loadavg' to see if it works
-properly on your system.  (You must run `configure' beforehand, but you
-need not build Make itself to run this test.)
-
-See the file NEWS for what has changed since previous releases.
-
-GNU Make is fully documented in make.texinfo.  See the section entitled
-`Problems and Bugs' for information on submitting bug reports.
-
-GNU Make is free software.  See the file COPYING for copying conditions.
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index d288743..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,19 +0,0 @@
-dnl
-dnl Check for a symbol
-dnl
-AC_DEFUN(AC_CHECK_SYMBOL, [dnl
-AC_MSG_CHECKING(for $1)
-AC_CACHE_VAL(ac_cv_check_symbol_$1, [dnl
-AC_TRY_LINK(, 
-changequote(,)dnl
-extern char *$1[]; puts(*$1);,
-changequote([,])dnl
-	    ac_cv_check_symbol_$1=yes, ac_cv_check_symbol_$1=no)])
-if test "$ac_cv_check_symbol_$1" = yes; then
-changequote(,)dnl
-  ac_tr_symbol=`echo $1 | tr '[a-z]' '[A-Z]'`
-changequote([,])dnl
-  AC_DEFINE_UNQUOTED(HAVE_${ac_tr_symbol})
-fi
-AC_MSG_RESULT($ac_cv_check_symbol_$1)])dnl
-dnl
diff --git a/build.sh.in b/build.sh.in
deleted file mode 100644
index 1667f0e..0000000
--- a/build.sh.in
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/sh
-# Shell script to build GNU Make in the absence of any `make' program.
-# @configure_input@
-
-# Copyright (C) 1993, 1994 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-# 
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# See Makefile.in for comments describing these variables.
-
-srcdir='@srcdir@'
-CC='@CC@'
-CFLAGS='@CFLAGS@'
-CPPFLAGS='@CPPFLAGS@'
-LDFLAGS='@LDFLAGS@'
-defines='@DEFS@ -DLIBDIR="${libdir}" -DINCLUDEDIR="${includedir}"'
-ALLOCA='@ALLOCA@'
-LOADLIBES='@LIBS@'
-extras='@LIBOBJS@'
-REMOTE='@REMOTE@'
-
-# Common prefix for machine-independent installed files.
-prefix='@prefix@'
-# Common prefix for machine-dependent installed files.
-exec_prefix='@exec_prefix@'
-# Directory to find libraries in for `-lXXX'.
-libdir=${exec_prefix}/lib
-# Directory to search by default for included makefiles.
-includedir=${prefix}/include
-
-# Exit as soon as any command fails.
-set -e
-
-# These are all the objects we need to link together.
-objs="commands.o job.o dir.o file.o misc.o main.o read.o remake.o rule.o implicit.o default.o variable.o expand.o function.o vpath.o version.o ar.o arscan.o signame.o getopt.o getopt1.o glob/glob.o glob/fnmatch.o remote-${REMOTE}.o ${extras} ${ALLOCA}"
-
-# Compile the source files into those objects.
-for file in `echo ${objs} | sed 's/\.o/.c/g'`; do
-  echo compiling ${file}...
-  $CC $defines $CPPFLAGS $CFLAGS \
-      -c -I. -I${srcdir} -I${srcdir}/glob ${srcdir}/$file
-done
-
-# The object files were actually all put in the current directory.
-# Remove the source directory names from the list.
-srcobjs="$objs"
-objs=
-for obj in $srcobjs; do
-  objs="$objs `basename $obj`"
-done
-
-# Link all the objects together.
-echo linking make...
-$CC $LDFLAGS $objs $LOADLIBES -o make.new
-echo done
-mv -f make.new make
diff --git a/compatMakefile b/compatMakefile
deleted file mode 100644
index 3ccfb6a..0000000
--- a/compatMakefile
+++ /dev/null
@@ -1,274 +0,0 @@
-# NOTE: If you have no `make' program at all to process this makefile, run
-# `build.sh' instead.
-#
-# Copyright (C) 1988,89,91,92,93,94,95,96 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-#
-#	Makefile for GNU Make
-#
-
-# Ultrix 2.2 make doesn't expand the value of VPATH.
-VPATH = @srcdir@
-# This must repeat the value, because configure will remove `VPATH = .'.
-srcdir = @srcdir@
-
-CC = @CC@
-
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-
-# Define these for your system as follows:
-#	-DNO_ARCHIVES		To disable `ar' archive support.
-#	-DNO_FLOAT		To avoid using floating-point numbers.
-#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
-#				Some compilers apparently accept this
-#				without complaint but produce losing code,
-#				so beware.
-# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
-# See also `config.h'.
-defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
-
-# Which flavor of remote job execution support to use.
-# The code is found in `remote-$(REMOTE).c'.
-REMOTE = @REMOTE@
-
-# If your system doesn't have alloca, or the one provided is bad, define this.
-ALLOCA = @ALLOCA@
-ALLOCA_SRC = $(srcdir)/alloca.c
-
-# If your system needs extra libraries loaded in, define them here.
-# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
-# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
-# alloca.c instead on those machines.
-LOADLIBES = @LIBS@
-
-# Any extra object files your system needs.
-extras = @LIBOBJS@
-
-# Common prefix for machine-independent installed files.
-prefix = @prefix@
-# Common prefix for machine-dependent installed files.
-exec_prefix = @exec_prefix@
-
-# Directory to install `make' in.
-bindir = $(exec_prefix)/bin
-# Directory to find libraries in for `-lXXX'.
-libdir = $(exec_prefix)/lib
-# Directory to search by default for included makefiles.
-includedir = $(prefix)/include
-# Directory to install the Info files in.
-infodir = $(prefix)/info
-# Directory to install the man page in.
-mandir = $(prefix)/man/man$(manext)
-# Number to put on the man page filename.
-manext = 1
-# Prefix to put on installed `make' binary file name.
-binprefix =
-# Prefix to put on installed `make' man page file name.
-manprefix = $(binprefix)
-
-# Whether or not make needs to be installed setgid.
-# The value should be either `true' or `false'.
-# On many systems, the getloadavg function (used to implement the `-l'
-# switch) will not work unless make is installed setgid kmem.
-install_setgid = @NEED_SETGID@
-# Install make setgid to this group so it can read /dev/kmem.
-group = @KMEM_GROUP@
-
-# Program to install `make'.
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-# Program to install the man page.
-INSTALL_DATA = @INSTALL_DATA@
-# Generic install program.
-INSTALL = @INSTALL@
-
-# Program to format Texinfo source into Info files.
-MAKEINFO = makeinfo
-# Program to format Texinfo source into DVI files.
-TEXI2DVI = texi2dvi
-
-# Programs to make tags files.
-ETAGS = etags -w
-CTAGS = ctags -w
-
-GLOB = glob/libglob.a
-
-objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
-       rule.o implicit.o default.o variable.o expand.o function.o	\
-       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o	\
-       getopt.o getopt1.o						\
-       $(GLOB) $(ALLOCA) $(extras)
-srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c		\
-       $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c		\
-       $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c		\
-       $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c	\
-       $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c	\
-       $(srcdir)/vpath.c $(srcdir)/version.c				\
-       $(srcdir)/remote-$(REMOTE).c					\
-       $(srcdir)/ar.c $(srcdir)/arscan.c				\
-       $(srcdir)/signame.c $(srcdir)/signame.h				\
-       $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h	\
-       $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/filedef.h		\
-       $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h		\
-       $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in
-
-
-.SUFFIXES:
-.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
-
-all: make
-info: make.info
-dvi: make.dvi
-# Some makes apparently use .PHONY as the default goal if it is before `all'.
-.PHONY: all check info dvi
-
-make.info: make.texinfo
-	$(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info
-
-make.dvi: make.texinfo
-	$(TEXI2DVI) $(srcdir)/make.texinfo
-
-make.ps: make.dvi
-	dvi2ps make.dvi > make.ps
-
-make: $(objs)
-	$(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new
-	mv -f make.new make
-
-# -I. is needed to find config.h in the build directory.
-.c.o:
-	$(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \
-	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
-
-# For some losing Unix makes.
-SHELL = /bin/sh
-MAKE = make
-
-$(GLOB): FORCE config.h
-	cd glob; $(MAKE) libglob.a
-FORCE:
-
-tagsrcs = $(srcs) $(srcdir)/remote-*.c
-TAGS: $(tagsrcs)
-	$(ETAGS) $(tagsrcs)
-tags: $(tagsrcs)
-	$(CTAGS) $(tagsrcs)
-
-.PHONY: install installdirs
-install: installdirs \
-	 $(bindir)/$(binprefix)make $(infodir)/make.info \
-	 $(mandir)/$(manprefix)make.$(manext)
-
-installdirs:
-	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
-
-$(bindir)/$(binprefix)make: make
-	$(INSTALL_PROGRAM) make $@.new
-	@if $(install_setgid); then \
-	   if chgrp $(group) $@.new && chmod g+s $@.new; then \
-	     echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
-	   else \
-	     echo "$@ needs to be owned by group $(group) and setgid;"; \
-	     echo "otherwise the \`-l' option will probably not work."; \
-	     echo "You may need special privileges to install $@."; \
-	   fi; \
-	 else true; fi
-# Some systems can't deal with renaming onto a running binary.
-	-rm -f $@.old
-	-mv $@ $@.old
-	mv $@.new $@
-
-$(infodir)/make.info: make.info
-	if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
-	for file in $${dir}/make.info*; do \
-	  name="`basename $$file`"; \
-	  $(INSTALL_DATA) $$file \
-	    `echo $@ | sed "s,make.info\$$,$$name,"`; \
-	done
-# Run install-info only if it exists.
-# Use `if' instead of just prepending `-' to the
-# line so we notice real errors from install-info.
-# We use `$(SHELL) -c' because some shells do not
-# fail gracefully when there is an unknown command.
-	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
-	  if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
-	  install-info --info-dir=$(infodir) $$dir/make.info; \
-	else true; fi
-
-$(mandir)/$(manprefix)make.$(manext): make.man
-	$(INSTALL_DATA) $(srcdir)/make.man $@
-
-
-loadavg: loadavg.c config.h
-	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
-	      loadavg.c $(LOADLIBES) -o $@
-# We copy getloadavg.c into a different file rather than compiling it
-# directly because some compilers clobber getloadavg.o in the process.
-loadavg.c: getloadavg.c
-	ln $(srcdir)/getloadavg.c loadavg.c || \
-	cp $(srcdir)/getloadavg.c loadavg.c
-check-loadavg: loadavg
-	@echo The system uptime program believes the load average to be:
-	-uptime
-	@echo The GNU load average checking code believes:
-	./loadavg
-check: check-loadavg
-
-
-.PHONY: clean realclean distclean mostlyclean
-clean: glob-clean
-	-rm -f make loadavg *.o core make.dvi
-distclean: clean glob-realclean
-	-rm -f Makefile config.h config.status build.sh stamp-config
-	-rm -f config.log config.cache
-	-rm -f TAGS tags
-	-rm -f make.?? make.??s make.log make.toc make.*aux
-	-rm -f loadavg.c
-realclean: distclean
-	-rm -f make.info*
-mostlyclean: clean
-
-.PHONY: glob-clean glob-realclean
-glob-clean glob-realclean:
-	cd glob; $(MAKE) $@
-
-Makefile: config.status $(srcdir)/Makefile.in
-	$(SHELL) config.status
-glob/Makefile: config.status $(srcdir)/glob/Makefile.in
-	$(SHELL) config.status
-config.h: stamp-config ;
-stamp-config: config.status $(srcdir)/config.h.in
-	$(SHELL) config.status
-	touch stamp-config
-
-#configure: configure.in aclocal.m4
-#	cd $(srcdir) && autoconf $(ACFLAGS)
-#config.h.in: configure.in aclocal.m4
-#	cd $(srcdir) && autoheader $(ACFLAGS)
-
-# This tells versions [3.59,3.63) of GNU make not to export all variables.
-.NOEXPORT:
-
-# The automatically generated dependencies below may omit config.h
-# because it is included with ``#include <config.h>'' rather than
-# ``#include "config.h"''.  So we add the explicit dependency to make sure.
-$(objs): config.h
-
-# Automatically generated dependencies will be put at the end of the file.
-
diff --git a/config.h.in b/config.h.in
deleted file mode 100644
index 6c535d7..0000000
--- a/config.h.in
+++ /dev/null
@@ -1,276 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.  */
-#ifndef _ALL_SOURCE
-#undef _ALL_SOURCE
-#endif
-
-/* Define if using alloca.c.  */
-#undef C_ALLOCA
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-#undef CRAY_STACKSEG_END
-
-/* Define for DGUX with <sys/dg_sys_info.h>.  */
-#undef DGUX
-
-/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
-#undef GETLOADAVG_PRIVILEGED
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef gid_t
-
-/* Define if you have alloca, as a function or macro.  */
-#undef HAVE_ALLOCA
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#undef HAVE_ALLOCA_H
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-#undef HAVE_DOPRNT
-
-/* Define if your system has a working fnmatch function.  */
-#undef HAVE_FNMATCH
-
-/* Define if your system has its own `getloadavg' function.  */
-#undef HAVE_GETLOADAVG
-
-/* Define if you have the getmntent function.  */
-#undef HAVE_GETMNTENT
-
-/* Define if the `long double' type works.  */
-#undef HAVE_LONG_DOUBLE
-
-/* Define if you support file names longer than 14 characters.  */
-#undef HAVE_LONG_FILE_NAMES
-
-/* Define if you have a working `mmap' system call.  */
-#undef HAVE_MMAP
-
-/* Define if system calls automatically restart after interruption
-   by a signal.  */
-#undef HAVE_RESTARTABLE_SYSCALLS
-
-/* Define if your struct stat has st_blksize.  */
-#undef HAVE_ST_BLKSIZE
-
-/* Define if your struct stat has st_blocks.  */
-#undef HAVE_ST_BLOCKS
-
-/* Define if you have the strcoll function and it is properly defined.  */
-#undef HAVE_STRCOLL
-
-/* Define if your struct stat has st_rdev.  */
-#undef HAVE_ST_RDEV
-
-/* Define if you have the strftime function.  */
-#undef HAVE_STRFTIME
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-#undef HAVE_SYS_WAIT_H
-
-/* Define if your struct tm has tm_zone.  */
-#undef HAVE_TM_ZONE
-
-/* Define if you don't have tm_zone but do have the external array
-   tzname.  */
-#undef HAVE_TZNAME
-
-/* Define if you have <unistd.h>.  */
-#undef HAVE_UNISTD_H
-
-/* Define if utime(file, NULL) sets file's timestamp to the present.  */
-#undef HAVE_UTIME_NULL
-
-/* Define if you have <vfork.h>.  */
-#undef HAVE_VFORK_H
-
-/* Define if you have the vprintf function.  */
-#undef HAVE_VPRINTF
-
-/* Define if you have the wait3 system call.  */
-#undef HAVE_WAIT3
-
-/* Define if on MINIX.  */
-#undef _MINIX
-
-/* Define if your struct nlist has an n_un member.  */
-#undef NLIST_NAME_UNION
-
-/* Define if you have <nlist.h>.  */
-#undef NLIST_STRUCT
-
-/* Define if your C compiler doesn't accept -c and -o together.  */
-#undef NO_MINUS_C_MINUS_O
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef pid_t
-
-/* Define if the system does not provide POSIX.1 features except
-   with this defined.  */
-#undef _POSIX_1_SOURCE
-
-/* Define if you need to in order for stat and other things to work.  */
-#undef _POSIX_SOURCE
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-#undef SETVBUF_REVERSED
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown
- */
-#undef STACK_DIRECTION
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
-#undef STAT_MACROS_BROKEN
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define on System V Release 4.  */
-#undef SVR4
-
-/* Define if `sys_siglist' is declared by <signal.h>.  */
-#undef SYS_SIGLIST_DECLARED
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef uid_t
-
-/* Define for Encore UMAX.  */
-#undef UMAX
-
-/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
-   instead of <sys/cpustats.h>.  */
-#undef UMAX4_3
-
-/* Define vfork as fork if vfork does not work.  */
-#undef vfork
-
-/* Define to the name of the SCCS `get' command.  */
-#undef SCCS_GET
-
-/* Define this if the SCCS `get' command understands the `-G<file>' option.  */
-#undef SCCS_GET_MINUS_G
-
-/* Define this if the C library defines the variable `sys_siglist'.  */
-#undef HAVE_SYS_SIGLIST
-
-/* Define this if the C library defines the variable `_sys_siglist'.  */
-#undef HAVE__SYS_SIGLIST
-
-/* Define this if you have the `union wait' type in <sys/wait.h>.  */
-#undef HAVE_UNION_WAIT
-
-/* Define if you have the dup2 function.  */
-#undef HAVE_DUP2
-
-/* Define if you have the getcwd function.  */
-#undef HAVE_GETCWD
-
-/* Define if you have the getgroups function.  */
-#undef HAVE_GETGROUPS
-
-/* Define if you have the getloadavg function.  */
-#undef HAVE_GETLOADAVG
-
-/* Define if you have the memmove function.  */
-#undef HAVE_MEMMOVE
-
-/* Define if you have the mktemp function.  */
-#undef HAVE_MKTEMP
-
-/* Define if you have the psignal function.  */
-#undef HAVE_PSIGNAL
-
-/* Define if you have the setegid function.  */
-#undef HAVE_SETEGID
-
-/* Define if you have the seteuid function.  */
-#undef HAVE_SETEUID
-
-/* Define if you have the setlinebuf function.  */
-#undef HAVE_SETLINEBUF
-
-/* Define if you have the setregid function.  */
-#undef HAVE_SETREGID
-
-/* Define if you have the setreuid function.  */
-#undef HAVE_SETREUID
-
-/* Define if you have the sigsetmask function.  */
-#undef HAVE_SIGSETMASK
-
-/* Define if you have the strerror function.  */
-#undef HAVE_STRERROR
-
-/* Define if you have the strsignal function.  */
-#undef HAVE_STRSIGNAL
-
-/* Define if you have the wait3 function.  */
-#undef HAVE_WAIT3
-
-/* Define if you have the waitpid function.  */
-#undef HAVE_WAITPID
-
-/* Define if you have the <dirent.h> header file.  */
-#undef HAVE_DIRENT_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <limits.h> header file.  */
-#undef HAVE_LIMITS_H
-
-/* Define if you have the <mach/mach.h> header file.  */
-#undef HAVE_MACH_MACH_H
-
-/* Define if you have the <memory.h> header file.  */
-#undef HAVE_MEMORY_H
-
-/* Define if you have the <ndir.h> header file.  */
-#undef HAVE_NDIR_H
-
-/* Define if you have the <string.h> header file.  */
-#undef HAVE_STRING_H
-
-/* Define if you have the <sys/dir.h> header file.  */
-#undef HAVE_SYS_DIR_H
-
-/* Define if you have the <sys/ndir.h> header file.  */
-#undef HAVE_SYS_NDIR_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/timeb.h> header file.  */
-#undef HAVE_SYS_TIMEB_H
-
-/* Define if you have the <sys/wait.h> header file.  */
-#undef HAVE_SYS_WAIT_H
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the dgc library (-ldgc).  */
-#undef HAVE_LIBDGC
-
-/* Define if you have the kstat library (-lkstat).  */
-#undef HAVE_LIBKSTAT
-
-/* Define if you have the sun library (-lsun).  */
-#undef HAVE_LIBSUN
diff --git a/configure b/configure
deleted file mode 100755
index 8564609..0000000
--- a/configure
+++ /dev/null
@@ -1,3501 +0,0 @@
-#! /bin/sh
-
-# From configure.in Id: configure.in,v 1.54 1997/04/07 18:02:17 psmith Exp 
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-export jobs with the Customs daemon (NOT SUPPORTED)"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.12"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=vpath.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-subdirs="glob"
-		
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:547: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:576: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:605: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  ac_prog_rejected=no
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:653: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 663 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:687: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:692: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:701: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:716: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:754: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      for ac_prog in ginstall installbsd scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    # OSF/1 installbsd also uses dspmsg, but is usable.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:804: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 819 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 836 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-			echo $ac_n "checking for AIX""... $ac_c" 1>&6
-echo "configure:864: checking for AIX" >&5
-cat > conftest.$ac_ext <<EOF
-#line 866 "configure"
-#include "confdefs.h"
-#ifdef _AIX
-  yes
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "yes" >/dev/null 2>&1; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
-#define _ALL_SOURCE 1
-EOF
-
-else
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-
-
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:888: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
-  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
-  echo "$ac_t""yes" 1>&6
-  ISC=yes # If later tests want to check for ISC.
-  cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
-  if test "$GCC" = yes; then
-    CC="$CC -posix"
-  else
-    CC="$CC -Xp"
-  fi
-else
-  echo "$ac_t""no" 1>&6
-  ISC=
-fi
-
-ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
-echo "configure:910: checking for minix/config.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 915 "configure"
-#include "confdefs.h"
-#include <minix/config.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  MINIX=yes
-else
-  echo "$ac_t""no" 1>&6
-MINIX=
-fi
-
-if test "$MINIX" = yes; then
-  cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
-  cat >> confdefs.h <<\EOF
-#define _POSIX_1_SOURCE 2
-EOF
-
-  cat >> confdefs.h <<\EOF
-#define _MINIX 1
-EOF
-
-fi
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:958: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 963 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  ac_cv_header_stdc=yes
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 988 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 1006 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
-  :
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1027 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:1038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  :
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
-  cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-ac_header_dirent=no
-for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:1066: checking for $ac_hdr that defines DIR" >&5
-if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1071 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <$ac_hdr>
-int main() {
-DIR *dirp = 0;
-; return 0; }
-EOF
-if { (eval echo configure:1079: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  eval "ac_cv_header_dirent_$ac_safe=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_dirent_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- ac_header_dirent=$ac_hdr; break
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
-if test $ac_header_dirent = dirent.h; then
-echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:1104: checking for opendir in -ldir" >&5
-ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-ldir  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 1112 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char opendir();
-
-int main() {
-opendir()
-; return 0; }
-EOF
-if { (eval echo configure:1123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  LIBS="$LIBS -ldir"
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:1145: checking for opendir in -lx" >&5
-ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lx  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 1153 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char opendir();
-
-int main() {
-opendir()
-; return 0; }
-EOF
-if { (eval echo configure:1164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  LIBS="$LIBS -lx"
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-fi
-
-echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:1187: checking for uid_t in sys/types.h" >&5
-if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1192 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "uid_t" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_type_uid_t=yes
-else
-  rm -rf conftest*
-  ac_cv_type_uid_t=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_type_uid_t" 1>&6
-if test $ac_cv_type_uid_t = no; then
-  cat >> confdefs.h <<\EOF
-#define uid_t int
-EOF
-
-  cat >> confdefs.h <<\EOF
-#define gid_t int
-EOF
-
-fi
-			echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1220: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1225 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_type_pid_t=yes
-else
-  rm -rf conftest*
-  ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
-  cat >> confdefs.h <<\EOF
-#define pid_t int
-EOF
-
-fi
-
-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1253: checking return type of signal handlers" >&5
-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1258 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <signal.h>
-#ifdef signal
-#undef signal
-#endif
-#ifdef __cplusplus
-extern "C" void (*signal (int, void (*)(int)))(int);
-#else
-void (*signal ()) ();
-#endif
-
-int main() {
-int i;
-; return 0; }
-EOF
-if { (eval echo configure:1275: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_type_signal=void
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_type_signal=int
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_type_signal" 1>&6
-cat >> confdefs.h <<EOF
-#define RETSIGTYPE $ac_cv_type_signal
-EOF
-
-
-for ac_hdr in unistd.h limits.h sys/param.h fcntl.h string.h memory.h \
-	         sys/timeb.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1298: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1303 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1308: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-if test "x$CC" != xcc; then
-  echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1336: checking whether $CC and cc understand -c and -o together" >&5
-else
-  echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1339: checking whether cc understands -c and -o together" >&5
-fi
-set dummy $CC; ac_cc="`echo $2 |
-		       sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
-if eval "test \"`echo '$''{'ac_cv_prog_cc_${ac_cc}_c_o'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'foo(){}' > conftest.c
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1351: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-   test -f conftest.o && { (eval echo configure:1352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
-then
-  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
-  if test "x$CC" != xcc; then
-    # Test first that cc exists at all.
-    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
-      ac_try='cc -c conftest.c -o conftest.o 1>&5'
-      if { (eval echo configure:1359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-	 test -f conftest.o && { (eval echo configure:1360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
-      then
-        # cc works too.
-        :
-      else
-        # cc exists but doesn't like -o.
-        eval ac_cv_prog_cc_${ac_cc}_c_o=no
-      fi
-    fi
-  fi
-else
-  eval ac_cv_prog_cc_${ac_cc}_c_o=no
-fi
-rm -f conftest*
-
-fi
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<\EOF
-#define NO_MINUS_C_MINUS_O 1
-EOF
-
-fi
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1387: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1392 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this.  */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this.  */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this.  */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
-   It does not let you subtract one const X* pointer from another in an arm
-   of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this.  */
-  char *t;
-  char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-  *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-  int x[] = {25, 17};
-  const int *foo = &x[0];
-  ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-  typedef const int *iptr;
-  iptr p = 0;
-  ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
-     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-  struct s { int j; const int *ap[3]; };
-  struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-  const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1441: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_c_const=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
-  cat >> confdefs.h <<\EOF
-#define const 
-EOF
-
-fi
-			echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6
-echo "configure:1461: checking whether stat file-mode macros are broken" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1466 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#if defined(S_ISBLK) && defined(S_IFDIR)
-# if S_ISBLK (S_IFDIR)
-You lose.
-# endif
-#endif
-
-#if defined(S_ISBLK) && defined(S_IFCHR)
-# if S_ISBLK (S_IFCHR)
-You lose.
-# endif
-#endif
-
-#if defined(S_ISLNK) && defined(S_IFREG)
-# if S_ISLNK (S_IFREG)
-You lose.
-# endif
-#endif
-
-#if defined(S_ISSOCK) && defined(S_IFREG)
-# if S_ISSOCK (S_IFREG)
-You lose.
-# endif
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "You lose" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_header_stat_broken=yes
-else
-  rm -rf conftest*
-  ac_cv_header_stat_broken=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_header_stat_broken" 1>&6
-if test $ac_cv_header_stat_broken = yes; then
-  cat >> confdefs.h <<\EOF
-#define STAT_MACROS_BROKEN 1
-EOF
-
-fi
-
-
-
-
-
-for ac_func in memmove psignal mktemp \
-	       dup2 getcwd sigsetmask getgroups setlinebuf \
-	       seteuid setegid setreuid setregid strerror strsignal
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1525: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1530 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-echo $ac_n "checking for sys_siglist""... $ac_c" 1>&6
-echo "configure:1578: checking for sys_siglist" >&5
-if eval "test \"`echo '$''{'ac_cv_check_symbol_sys_siglist'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1583 "configure"
-#include "confdefs.h"
-
-int main() {
-extern char *sys_siglist[]; puts(*sys_siglist);
-; return 0; }
-EOF
-if { (eval echo configure:1590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  	    ac_cv_check_symbol_sys_siglist=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_check_symbol_sys_siglist=no
-fi
-rm -f conftest*
-fi
-
-if test "$ac_cv_check_symbol_sys_siglist" = yes; then
-  ac_tr_symbol=`echo sys_siglist | tr '[a-z]' '[A-Z]'`
-  cat >> confdefs.h <<EOF
-#define HAVE_${ac_tr_symbol} 1
-EOF
-
-fi
-echo "$ac_t""$ac_cv_check_symbol_sys_siglist" 1>&6
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments.  Useless!
-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1613: checking for working alloca.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1618 "configure"
-#include "confdefs.h"
-#include <alloca.h>
-int main() {
-char *p = alloca(2 * sizeof(int));
-; return 0; }
-EOF
-if { (eval echo configure:1625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  ac_cv_header_alloca_h=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_alloca_h=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
-if test $ac_cv_header_alloca_h = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA_H 1
-EOF
-
-fi
-
-echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1646: checking for alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1651 "configure"
-#include "confdefs.h"
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# if HAVE_ALLOCA_H
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #pragma alloca
-#  else
-#   ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-int main() {
-char *p = (char *) alloca(1);
-; return 0; }
-EOF
-if { (eval echo configure:1674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  ac_cv_func_alloca_works=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_func_alloca_works=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
-if test $ac_cv_func_alloca_works = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA 1
-EOF
-
-fi
-
-if test $ac_cv_func_alloca_works = no; then
-  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
-  # that cause trouble.  Some versions do not even contain alloca or
-  # contain a buggy version.  If you still want to use their alloca,
-  # use ar to extract alloca.o from them instead of compiling alloca.c.
-  ALLOCA=alloca.o
-  cat >> confdefs.h <<\EOF
-#define C_ALLOCA 1
-EOF
-
-
-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1706: checking whether alloca needs Cray hooks" >&5
-if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1711 "configure"
-#include "confdefs.h"
-#if defined(CRAY) && ! defined(CRAY2)
-webecray
-#else
-wenotbecray
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "webecray" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_os_cray=yes
-else
-  rm -rf conftest*
-  ac_cv_os_cray=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_os_cray" 1>&6
-if test $ac_cv_os_cray = yes; then
-for ac_func in _getb67 GETB67 getb67; do
-  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1736: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1741 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  cat >> confdefs.h <<EOF
-#define CRAY_STACKSEG_END $ac_func
-EOF
-
-  break
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-done
-fi
-
-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:1791: checking stack direction for C alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_c_stack_direction=0
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1799 "configure"
-#include "confdefs.h"
-find_stack_direction ()
-{
-  static char *addr = 0;
-  auto char dummy;
-  if (addr == 0)
-    {
-      addr = &dummy;
-      return find_stack_direction ();
-    }
-  else
-    return (&dummy > addr) ? 1 : -1;
-}
-main ()
-{
-  exit (find_stack_direction() < 0);
-}
-EOF
-if { (eval echo configure:1818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_c_stack_direction=1
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_c_stack_direction=-1
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
-cat >> confdefs.h <<EOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-EOF
-
-fi
-
-ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:1841: checking for vfork.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1846 "configure"
-#include "confdefs.h"
-#include <vfork.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1851: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  cat >> confdefs.h <<\EOF
-#define HAVE_VFORK_H 1
-EOF
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:1876: checking for working vfork" >&5
-if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-  echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:1882: checking for vfork" >&5
-if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1887 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char vfork(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char vfork();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_vfork) || defined (__stub___vfork)
-choke me
-#else
-vfork();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_func_vfork=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_vfork=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'vfork`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  :
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1931 "configure"
-#include "confdefs.h"
-/* Thanks to Paul Eggert for this test.  */
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_VFORK_H
-#include <vfork.h>
-#endif
-/* On some sparc systems, changes by the child to local and incoming
-   argument registers are propagated back to the parent.
-   The compiler is told about this with #include <vfork.h>,
-   but some compilers (e.g. gcc -O) don't grok <vfork.h>.
-   Test for this by using a static variable whose address
-   is put into a register that is clobbered by the vfork.  */
-static
-#ifdef __cplusplus
-sparc_address_test (int arg)
-#else
-sparc_address_test (arg) int arg;
-#endif
-{
-  static pid_t child;
-  if (!child) {
-    child = vfork ();
-    if (child < 0) {
-      perror ("vfork");
-      _exit(2);
-    }
-    if (!child) {
-      arg = getpid();
-      write(-1, "", 0);
-      _exit (arg);
-    }
-  }
-}
-main() {
-  pid_t parent = getpid ();
-  pid_t child;
-
-  sparc_address_test ();
-
-  child = vfork ();
-
-  if (child == 0) {
-    /* Here is another test for sparc vfork register problems.
-       This test uses lots of local variables, at least
-       as many local variables as main has allocated so far
-       including compiler temporaries.  4 locals are enough for
-       gcc 1.40.3 on a Solaris 4.1.3 sparc, but we use 8 to be safe.
-       A buggy compiler should reuse the register of parent
-       for one of the local variables, since it will think that
-       parent can't possibly be used any more in this routine.
-       Assigning to the local variable will thus munge parent
-       in the parent process.  */
-    pid_t
-      p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
-      p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
-    /* Convince the compiler that p..p7 are live; otherwise, it might
-       use the same hardware register for all 8 local variables.  */
-    if (p != p1 || p != p2 || p != p3 || p != p4
-	|| p != p5 || p != p6 || p != p7)
-      _exit(1);
-
-    /* On some systems (e.g. IRIX 3.3),
-       vfork doesn't separate parent from child file descriptors.
-       If the child closes a descriptor before it execs or exits,
-       this munges the parent's descriptor as well.
-       Test for this by closing stdout in the child.  */
-    _exit(close(fileno(stdout)) != 0);
-  } else {
-    int status;
-    struct stat st;
-
-    while (wait(&status) != child)
-      ;
-    exit(
-	 /* Was there some problem with vforking?  */
-	 child < 0
-
-	 /* Did the child fail?  (This shouldn't happen.)  */
-	 || status
-
-	 /* Did the vfork/compiler bug occur?  */
-	 || parent != getpid()
-
-	 /* Did the file descriptor bug occur?  */
-	 || fstat(fileno(stdout), &st) != 0
-	 );
-  }
-}
-EOF
-if { (eval echo configure:2026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_func_vfork_works=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_func_vfork_works=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_func_vfork_works" 1>&6
-if test $ac_cv_func_vfork_works = no; then
-  cat >> confdefs.h <<\EOF
-#define vfork fork
-EOF
-
-fi
-
-echo $ac_n "checking whether setvbuf arguments are reversed""... $ac_c" 1>&6
-echo "configure:2049: checking whether setvbuf arguments are reversed" >&5
-if eval "test \"`echo '$''{'ac_cv_func_setvbuf_reversed'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2057 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-/* If setvbuf has the reversed format, exit 0. */
-main () {
-  /* This call has the arguments reversed.
-     A reversed system may check and see that the address of main
-     is not _IOLBF, _IONBF, or _IOFBF, and return nonzero.  */
-  if (setvbuf(stdout, _IOLBF, (char *) main, BUFSIZ) != 0)
-    exit(1);
-  putc('\r', stdout);
-  exit(0);			/* Non-reversed systems segv here.  */
-}
-EOF
-if { (eval echo configure:2071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_func_setvbuf_reversed=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_func_setvbuf_reversed=no
-fi
-rm -fr conftest*
-fi
-
-rm -f core core.* *.core
-fi
-
-echo "$ac_t""$ac_cv_func_setvbuf_reversed" 1>&6
-if test $ac_cv_func_setvbuf_reversed = yes; then
-  cat >> confdefs.h <<\EOF
-#define SETVBUF_REVERSED 1
-EOF
-
-fi
-
-ac_have_func=no # yes means we've found a way to get the load average.
-
-# Some systems with -lutil have (and need) -lkvm as well, some do not.
-# On Solaris, -lkvm requires nlist from -lelf, so check that first
-# to get the right answer into the cache.
-echo $ac_n "checking for elf_begin in -lelf""... $ac_c" 1>&6
-echo "configure:2100: checking for elf_begin in -lelf" >&5
-ac_lib_var=`echo elf'_'elf_begin | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lelf  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2108 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char elf_begin();
-
-int main() {
-elf_begin()
-; return 0; }
-EOF
-if { (eval echo configure:2119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  LIBS="-lelf $LIBS"
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking for kvm_open in -lkvm""... $ac_c" 1>&6
-echo "configure:2140: checking for kvm_open in -lkvm" >&5
-ac_lib_var=`echo kvm'_'kvm_open | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lkvm  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2148 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char kvm_open();
-
-int main() {
-kvm_open()
-; return 0; }
-EOF
-if { (eval echo configure:2159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  LIBS="-lkvm $LIBS"
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-# Check for the 4.4BSD definition of getloadavg.
-echo $ac_n "checking for getloadavg in -lutil""... $ac_c" 1>&6
-echo "configure:2181: checking for getloadavg in -lutil" >&5
-ac_lib_var=`echo util'_'getloadavg | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lutil  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2189 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char getloadavg();
-
-int main() {
-getloadavg()
-; return 0; }
-EOF
-if { (eval echo configure:2200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  LIBS="-lutil $LIBS" ac_have_func=yes ac_cv_func_getloadavg_setgid=yes
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test $ac_have_func = no; then
-  # There is a commonly available library for RS/6000 AIX.
-  # Since it is not a standard part of AIX, it might be installed locally.
-  ac_getloadavg_LIBS="$LIBS" LIBS="-L/usr/local/lib $LIBS"
-  echo $ac_n "checking for getloadavg in -lgetloadavg""... $ac_c" 1>&6
-echo "configure:2226: checking for getloadavg in -lgetloadavg" >&5
-ac_lib_var=`echo getloadavg'_'getloadavg | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lgetloadavg  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2234 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char getloadavg();
-
-int main() {
-getloadavg()
-; return 0; }
-EOF
-if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  LIBS="-lgetloadavg $LIBS"
-else
-  echo "$ac_t""no" 1>&6
-LIBS="$ac_getloadavg_LIBS"
-fi
-
-fi
-
-# Make sure it is really in the library, if we think we found it.
-for ac_func in getloadavg
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2272: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2277 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:2300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-LIBOBJS="$LIBOBJS ${ac_func}.o"
-fi
-done
-
-
-
-if test $ac_cv_func_getloadavg = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_GETLOADAVG 1
-EOF
-
-  ac_have_func=yes
-else
-  # Figure out what our getloadavg.c needs.
-  ac_have_func=no
-  ac_safe=`echo "sys/dg_sys_info.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for sys/dg_sys_info.h""... $ac_c" 1>&6
-echo "configure:2338: checking for sys/dg_sys_info.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2343 "configure"
-#include "confdefs.h"
-#include <sys/dg_sys_info.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2348: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  ac_have_func=yes; cat >> confdefs.h <<\EOF
-#define DGUX 1
-EOF
-
-  echo $ac_n "checking for dg_sys_info in -ldgc""... $ac_c" 1>&6
-echo "configure:2369: checking for dg_sys_info in -ldgc" >&5
-ac_lib_var=`echo dgc'_'dg_sys_info | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-ldgc  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2377 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char dg_sys_info();
-
-int main() {
-dg_sys_info()
-; return 0; }
-EOF
-if { (eval echo configure:2388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_lib=HAVE_LIB`echo dgc | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
-  LIBS="-ldgc $LIBS"
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-  # We cannot check for <dwarf.h>, because Solaris 2 does not use dwarf (it
-  # uses stabs), but it is still SVR4.  We cannot check for <elf.h> because
-  # Irix 4.0.5F has the header but not the library.
-  if test $ac_have_func = no && test $ac_cv_lib_elf_elf_begin = yes; then
-    ac_have_func=yes; cat >> confdefs.h <<\EOF
-#define SVR4 1
-EOF
-
-  fi
-
-  if test $ac_have_func = no; then
-    ac_safe=`echo "inq_stats/cpustats.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for inq_stats/cpustats.h""... $ac_c" 1>&6
-echo "configure:2433: checking for inq_stats/cpustats.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2438 "configure"
-#include "confdefs.h"
-#include <inq_stats/cpustats.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2443: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  ac_have_func=yes; cat >> confdefs.h <<\EOF
-#define UMAX 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define UMAX4_3 1
-EOF
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  fi
-
-  if test $ac_have_func = no; then
-    ac_safe=`echo "sys/cpustats.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for sys/cpustats.h""... $ac_c" 1>&6
-echo "configure:2476: checking for sys/cpustats.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2481 "configure"
-#include "confdefs.h"
-#include <sys/cpustats.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2486: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  ac_have_func=yes; cat >> confdefs.h <<\EOF
-#define UMAX 1
-EOF
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  fi
-
-  if test $ac_have_func = no; then
-    for ac_hdr in mach/mach.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2517: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2522 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2527: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-  fi
-
-  ac_safe=`echo "nlist.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for nlist.h""... $ac_c" 1>&6
-echo "configure:2557: checking for nlist.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2562 "configure"
-#include "confdefs.h"
-#include <nlist.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2567: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  cat >> confdefs.h <<\EOF
-#define NLIST_STRUCT 1
-EOF
-
-  echo $ac_n "checking for n_un in struct nlist""... $ac_c" 1>&6
-echo "configure:2588: checking for n_un in struct nlist" >&5
-if eval "test \"`echo '$''{'ac_cv_struct_nlist_n_un'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2593 "configure"
-#include "confdefs.h"
-#include <nlist.h>
-int main() {
-struct nlist n; n.n_un.n_name = 0;
-; return 0; }
-EOF
-if { (eval echo configure:2600: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_struct_nlist_n_un=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_struct_nlist_n_un=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_struct_nlist_n_un" 1>&6
-  if test $ac_cv_struct_nlist_n_un = yes; then
-    cat >> confdefs.h <<\EOF
-#define NLIST_NAME_UNION 1
-EOF
-
-  fi
-  
-else
-  echo "$ac_t""no" 1>&6
-fi
-fi # Do not have getloadavg in system libraries.
-
-# Some definitions of getloadavg require that the program be installed setgid.
-echo $ac_n "checking whether getloadavg requires setgid""... $ac_c" 1>&6
-echo "configure:2627: checking whether getloadavg requires setgid" >&5
-if eval "test \"`echo '$''{'ac_cv_func_getloadavg_setgid'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2632 "configure"
-#include "confdefs.h"
-#include "$srcdir/getloadavg.c"
-#ifdef LDAV_PRIVILEGED
-Yowza Am I SETGID yet
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "Yowza Am I SETGID yet" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_func_getloadavg_setgid=yes
-else
-  rm -rf conftest*
-  ac_cv_func_getloadavg_setgid=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_func_getloadavg_setgid" 1>&6
-if test $ac_cv_func_getloadavg_setgid = yes; then
-  NEED_SETGID=true; cat >> confdefs.h <<\EOF
-#define GETLOADAVG_PRIVILEGED 1
-EOF
-
-else
-  NEED_SETGID=false
-fi
-
-if test $ac_cv_func_getloadavg_setgid = yes; then
-  echo $ac_n "checking group of /dev/kmem""... $ac_c" 1>&6
-echo "configure:2663: checking group of /dev/kmem" >&5
-if eval "test \"`echo '$''{'ac_cv_group_kmem'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # On Solaris, /dev/kmem is a symlink.  Get info on the real file.
-  ac_ls_output=`ls -lgL /dev/kmem 2>/dev/null`
-  # If we got an error (system does not support symlinks), try without -L.
-  test -z "$ac_ls_output" && ac_ls_output=`ls -lg /dev/kmem`
-  ac_cv_group_kmem=`echo $ac_ls_output \
-    | sed -ne 's/[ 	][ 	]*/ /g;
-	       s/^.[sSrwx-]* *[0-9]* *\([^0-9]*\)  *.*/\1/;
-	       / /s/.* //;p;'`
-
-fi
-
-echo "$ac_t""$ac_cv_group_kmem" 1>&6
-  KMEM_GROUP=$ac_cv_group_kmem
-fi
-
-echo $ac_n "checking for kstat_open in -lkstat""... $ac_c" 1>&6
-echo "configure:2683: checking for kstat_open in -lkstat" >&5
-ac_lib_var=`echo kstat'_'kstat_open | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lkstat  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2691 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char kstat_open();
-
-int main() {
-kstat_open()
-; return 0; }
-EOF
-if { (eval echo configure:2702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_lib=HAVE_LIB`echo kstat | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
-  LIBS="-lkstat $LIBS"
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking for working strcoll""... $ac_c" 1>&6
-echo "configure:2730: checking for working strcoll" >&5
-if eval "test \"`echo '$''{'ac_cv_func_strcoll_works'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_strcoll_works=no
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2738 "configure"
-#include "confdefs.h"
-#include <string.h>
-main ()
-{
-  exit (strcoll ("abc", "def") >= 0 ||
-	strcoll ("ABC", "DEF") >= 0 ||
-	strcoll ("123", "456") >= 0);
-}
-EOF
-if { (eval echo configure:2748: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_func_strcoll_works=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_func_strcoll_works=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_func_strcoll_works" 1>&6
-if test $ac_cv_func_strcoll_works = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_STRCOLL 1
-EOF
-
-fi
-
-
-# Check out the wait reality.
-for ac_hdr in sys/wait.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2776: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2781 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2786: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
- for ac_func in waitpid wait3
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2814: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2819 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:2842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-echo $ac_n "checking for union wait""... $ac_c" 1>&6
-echo "configure:2867: checking for union wait" >&5
-if eval "test \"`echo '$''{'make_cv_union_wait'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2872 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/wait.h>
-int main() {
-union wait status; int pid; pid = wait (&status);
-#ifdef WEXITSTATUS
-/* Some POSIXoid systems have both the new-style macros and the old
-   union wait type, and they do not work together.  If union wait
-   conflicts with WEXITSTATUS et al, we don't want to use it at all.  */
-if (WEXITSTATUS (status) != 0) pid = -1;
-#ifdef WTERMSIG
-/* If we have WEXITSTATUS and WTERMSIG, just use them on ints.  */
--- blow chunks here --
-#endif
-#endif
-#ifdef HAVE_WAITPID
-/* Make sure union wait works with waitpid.  */
-pid = waitpid (-1, &status, 0);
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:2895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  make_cv_union_wait=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  make_cv_union_wait=no
-fi
-rm -f conftest*
-fi
-
-if test "$make_cv_union_wait" = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_UNION_WAIT 1
-EOF
-
-fi
-echo "$ac_t""$make_cv_union_wait" 1>&6
-
-echo $ac_n "checking for sys_siglist declaration in signal.h or unistd.h""... $ac_c" 1>&6
-echo "configure:2916: checking for sys_siglist declaration in signal.h or unistd.h" >&5
-if eval "test \"`echo '$''{'ac_cv_decl_sys_siglist'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2921 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <signal.h>
-/* NetBSD declares sys_siglist in unistd.h.  */
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-int main() {
-char *msg = *(sys_siglist + 1);
-; return 0; }
-EOF
-if { (eval echo configure:2933: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_decl_sys_siglist=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_decl_sys_siglist=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_decl_sys_siglist" 1>&6
-if test $ac_cv_decl_sys_siglist = yes; then
-  cat >> confdefs.h <<\EOF
-#define SYS_SIGLIST_DECLARED 1
-EOF
-
-fi
-
-
-# The presence of the following is not meant to imply
-# that make necessarily works on those systems.
-echo $ac_n "checking for getpwnam in -lsun""... $ac_c" 1>&6
-echo "configure:2957: checking for getpwnam in -lsun" >&5
-ac_lib_var=`echo sun'_'getpwnam | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lsun  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2965 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char getpwnam();
-
-int main() {
-getpwnam()
-; return 0; }
-EOF
-if { (eval echo configure:2976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_lib=HAVE_LIB`echo sun | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
-  LIBS="-lsun $LIBS"
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
- REMOTE=stub
-# Check whether --with-customs or --without-customs was given.
-if test "${with_customs+set}" = set; then
-  withval="$with_customs"
-  REMOTE=cstms LIBS="$LIBS libcustoms.a"
-fi
-
-
-echo checking for location of SCCS get command
-if test -f /usr/sccs/get; then
-  SCCS_GET=/usr/sccs/get
-  cat >> confdefs.h <<\EOF
-#define SCCS_GET "/usr/sccs/get"
-EOF
-
-else
-  SCCS_GET=get
-  cat >> confdefs.h <<\EOF
-#define SCCS_GET "get"
-EOF
-
-fi
-ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later.
-if ( /usr/sccs/admin -n s.conftest || admin -n s.conftest ) >/dev/null 2>&1 &&
-   test -f s.conftest; then
-  # We successfully created an SCCS file.
-  echo checking if SCCS get command understands -G
-  if $SCCS_GET -Gconftoast s.conftest >/dev/null 2>&1 &&
-     test -f conftoast; then
-    cat >> confdefs.h <<\EOF
-#define SCCS_GET_MINUS_G 1
-EOF
-
-  fi
-fi
-rm -f s.conftest conftoast
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.12"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile build.sh config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@subdirs@%$subdirs%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@CPP@%$CPP%g
-s%@LIBOBJS@%$LIBOBJS%g
-s%@ALLOCA@%$ALLOCA%g
-s%@NEED_SETGID@%$NEED_SETGID%g
-s%@KMEM_GROUP@%$KMEM_GROUP%g
-s%@REMOTE@%$REMOTE%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile build.sh"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="config.h"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  echo creating $ac_file
-
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
-    fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
-  fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-# Makefile uses this timestamp file to know when to remake Makefile,
-# build.sh, and glob/Makefile.
-touch stamp-config
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-if test "$no_recursion" != yes; then
-
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  for ac_arg in $ac_configure_args; do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case "$ac_arg" in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
-    esac
-  done
-
-  for ac_config_dir in glob; do
-
-    # Do not complain, so a configure script can configure whichever
-    # parts of a large source tree are present.
-    if test ! -d $srcdir/$ac_config_dir; then
-      continue
-    fi
-
-    echo configuring in $ac_config_dir
-
-    case "$srcdir" in
-    .) ;;
-    *)
-      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
-      else
-        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
-      fi
-      ;;
-    esac
-
-    ac_popdir=`pwd`
-    cd $ac_config_dir
-
-      # A "../" for each directory in /$ac_config_dir.
-      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
-
-    case "$srcdir" in
-    .) # No --srcdir option.  We are building in place.
-      ac_sub_srcdir=$srcdir ;;
-    /*) # Absolute path.
-      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
-    *) # Relative path.
-      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
-    esac
-
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_sub_srcdir/configure; then
-      ac_sub_configure=$ac_sub_srcdir/configure
-    elif test -f $ac_sub_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
-    else
-      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
-      ac_sub_configure=
-    fi
-
-    # The recursion is here.
-    if test -n "$ac_sub_configure"; then
-
-      # Make the cache file name correct relative to the subdirectory.
-      case "$cache_file" in
-      /*) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-        ac_sub_cache_file="$ac_dots$cache_file" ;;
-      esac
-  case "$ac_given_INSTALL" in
-        [/$]*) INSTALL="$ac_given_INSTALL" ;;
-        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-        esac
-
-      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
-      # The eval makes quoting arguments work.
-      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
-      then :
-      else
-        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
-      fi
-    fi
-
-    cd $ac_popdir
-  done
-fi
-
-