summaryrefslogtreecommitdiff
path: root/INSTALL
diff options
context:
space:
mode:
authorPaul Smith <psmith@gnu.org>2004-03-06 08:00:17 +0000
committerPaul Smith <psmith@gnu.org>2004-03-06 08:00:17 +0000
commit213ccc2234fe09b99a39f3d3884626898596c815 (patch)
tree4370d925786d3815ea87e3088862a678200a0aaa /INSTALL
parente3e3f15ebcbe29bed87354c317824c95cac427c4 (diff)
downloadgunmake-213ccc2234fe09b99a39f3d3884626898596c815.tar.gz
More maintainer rules.
Diffstat (limited to 'INSTALL')
-rw-r--r--INSTALL142
1 files changed, 92 insertions, 50 deletions
diff --git a/INSTALL b/INSTALL
index bca44d0..54caf7c 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,25 +1,40 @@
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
Basic Installation
==================
+ These are generic installation instructions.
+
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
The simplest way to compile this package is:
@@ -34,13 +49,7 @@ The simplest way to compile this package is:
2. Type `make' to compile the package.
- If you're building GNU make on a system which does not already have
- a `make', you can use the build.sh shell script to compile. Run
- `sh ./build.sh'. This should compile the program in the current
- directory. Then you will have a Make program that you can use for
- `make install', or whatever else.
-
- 3. Optionally, type `./make check' to run any self-tests that come with
+ 3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
@@ -59,14 +68,16 @@ Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+ *Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
@@ -79,11 +90,11 @@ directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
Installation Names
==================
@@ -126,22 +137,32 @@ you can use the `configure' options `--x-includes=DIR' and
Specifying the System Type
==========================
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
CPU-COMPANY-SYSTEM
-See the file `config.sub' for the possible values of each field. If
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
- If you are building compiler tools for cross-compiling, you can also
+ If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
Sharing Defaults
================
@@ -154,20 +175,44 @@ default values for variables like `CC', `cache_file', and `prefix'.
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
-Operation Controls
+Defining Variables
==================
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
`configure' recognizes the following options to control how it
operates.
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
`--help'
+`-h'
Print a summary of the options to `configure', and exit.
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
`--quiet'
`--silent'
`-q'
@@ -179,9 +224,6 @@ operates.
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.